What is an Arterial Blood Gas (ABG)?
An arterial blood gases (ABG) test is a blood test that measures the acidity, or pH, and the levels of oxygen (O2) and carbon dioxide (CO2) from an artery. The test is used to check the function of the patient’s lungs and how well they are able to move oxygen into the blood and remove carbon dioxide.
An ABG is one of the most commonly used tests to measure oxygenation and blood acid levels – two important measures of a patient’s clinical status and correct interpretation can lead to quicker and more accurate changes in the plan of care. It’s commonly performed in the ICU and ER setting; however, ABGs can be drawn on any patient on any floor, depending on their diagnosis.
Before learning how to analyze an ABG, it’s important to understand what exactly it is, the different components and their corresponding ABG values, and how it differs from a Venous Blood Gas (VBG).
Arterial blood gases can be confusing to understand at first. However, it’s a crucial skill for nurses, physicians, respiratory therapists, and nursing students to learn.
How to withdraw Blood for an ABG
An Arterial Blood Gas requires the nurse to collect a small sample of blood – generally, a full 1 ml³ is preferred. Blood can be drawn via an arterial stick from the wrist, groin, or above the elbow.
The radial artery on the wrist is most commonly used to obtain the sample. However, the femoral artery and brachial artery can be used if necessary. If the patient already has a pre-existing arterial line, this can be used to obtain the sample.
Once the blood is obtained, it is either sent to the hospital’s central lab for analysis or tested by the respiratory therapist on the unit’s blood gas analyzer. Most ICUs have one on the unit for a quick turnaround.
While arterial samples are the best for diagnostic reasons, they do provide some challenges for nurses and providers. The main issue is if the patient does not have a functioning arterial line, a frontline clinician has to draw the arterial sample. Some hospitals allow specially trained nurses or phlebotomists to perform this skill but only after an intense training program. If a provider is not available to perform the arterial stick, treatment could be delayed.
What is Measured in an ABG?
There are six key components to an ABG. They include,
- pH – This measures the balance of acids and bases in your blood.
- Partial pressure of oxygen (PaO2) – This measures the pressure of oxygen dissolved in your blood.
- Partial pressure of carbon dioxide (PaCO2) – This measures the amount of carbon dioxide in your blood and how well carbon dioxide can move out of your body.
- Bicarbonate (HCO3) – This is calculated using the measured values of pH and PaCO2 to determine the amount of the basic compound made from carbon dioxide (CO2.)
- Oxygen saturation (O2 Sat) – These measures how much haemoglobin in your blood is carrying oxygen.
- Hemoglobin – This measures the amount of hemoglobin in your blood.
ABG Normal Values
The aforementioned components all have different normal values and represent different aspects of the blood gas. According to the National Institute of Health, typical normal values are:
- pH: 7.35-7.45
- Partial pressure of oxygen (PaO2): 75 to 100 mmHg
- Partial pressure of carbon dioxide (PaCO2): 35-45 mmHg
- Bicarbonate (HCO3): 22-26 mEq/L
- Oxygen saturation (O2 Sat): 94-100%
How to Interpret ABG Results
The first value a nurse should look at is the pH to determine if the patient is in the normal range, above, or below. If a patient’s pH > 7.45, the patient is in alkalosis. If the pH < 7.35, then the patient is acidosis. Remember, the lower the pH number, the higher the acid level in the body. And even with a normal pH level, acidosis or alkalosis may still be present, as the body can compensate to balance the pH.
Next, examine the PaCO2. This will determine if the changes in the blood gas are due to the respiratory system or metabolically driven. In combination with the HCO3, the nurse will be able to fully comprehend the blood gas.
The acronym ROME is used to help nurses remember the relationship between pH and CO2.
Respiratory Opposite — In respiratory disorders, the pH and CO2 arrows move in opposite directions.
Metabolic Equal — In metabolic disorders, the PH and CO2 arrows will move in the same direction.
There are many different ways to remember how to analyze arterial blood gas. It’s a nurse’s responsibility to be able to identify key components in order to be prepared for the next step. Asking the help of more senior clinical nurses and respiratory therapists will allow novice nurses to master this skill.
ABG vs. VBG
A VBG on the other hand, tests the venous blood and can accurately determine pH and CO2 but is unable to provide reliable O2 data. For this reason, arterial testing has become the gold standard in sick patients who are at risk for sudden decompensation or those with a respiratory component.
Why is an ABG Done?
ABGs are drawn for a variety of reasons. These may include concerns for:
- Lung Failure
- Acute respiratory distress syndrome (ARDS)
- Sepsis
- Diabetic ketoacidosis (DKA)
- Cystic fibrosis
- Pneumonia
- Emphysema
- Hypovolemic shock
- Acute heart failure
- Cardiac arrest
- Renal tubular acidosis (RTA)
- Kidney Failure
- Septic Shock
- Trauma
- Chronic vomiting
- Uncontrolled diabetes
- Asthma
- Chronic Obstructive Pulmonary Disease (COPD)
- Hemorrhage
- Drug Overdose
- Metabolic Disease
- Chemical Poisoning
- To check if lung condition treatments are working
What Happens During an ABG?
If an ABG is ordered by the healthcare team, then blood drawn will be performed by either,
- Medical Physician
- Physician Assistant
- Nurse Practitioner
- Registered Nurse
- Respiratory Therapist
During the blood draw, the healthcare provider will locate the radial artery in either the right or left arm. The radial artery is the preferred artery of choice because it is easier to locate and is superficial. Then a small needle is inserted into the artery and blood is withdrawn. Approximately 1 ml is required. Once the blood is taken, it is sent to a specialized laboratory to determine the values.
Alternative sites for drawing an ABG include the brachial or femoral artery; however, these do have disadvantages because they are,
- Harder to locate
- Poor collateral circulation
What Risks are Associated with an ABG?
The risks associated with drawing an ABG, if done correctly, are minimal. Possible risks include,
- Arteriospasm
- Hematoma
- Nerve damage
- Fainting
- Vasovagal response
- Sweating
- Pallor
- Drop in blood pressure
- Bleeding at the site
REFERENCE
- Kune T, Sisman AR, Solak A, Tuglu B, Cinkooglu B, Coder C. The effects of different syringe volume needle size and sample volume on blood gas analysis in syringe washed with heparin. Biochemica Medica. 2012;22:189–201.
- Baird G. Preanalytical considerations in blood gas analysis. Biochemical Medica. 2013;23:19–27. doi: 10.11613/BM.2013.005
- Theodore AC, Manaker S, Finlay G. Venous blood gases and other alternatives to arterial blood gases. www.uptodate.com 2016 up to date.
- Trager R, Pirouz S, Kamangar N, Corry D. Agreement between central venous and arterial blood gas measurements in the intestine care unit. Clin J Am Soc Nephrol. 2010;5:390–94. doi: 10.2215/CJN.00330109.
- Byme AL, Bennett M, Chatterji R, Symons R, Pace NL, Thomas PS. Peripheral venous and arterial blood gas analysis in adults: Are they comparable? A systematic review and meta-analysis. Respirology. 2014;19:168–75. doi: 10.1111/resp.12225.
- Dr Paula Zaininger, ABG Interpretation https://geekymedics.com/abg-interpretation/
Stories are the threads that bind us; through them, we understand each other, grow, and heal.
JOHN NOORD
Connect with “Nurses Lab Editorial Team”
I hope you found this information helpful. Do you have any questions or comments? Kindly write in comments section. Subscribe the Blog with your email so you can stay updated on upcoming events and the latest articles.
